Aastra-telecom 9116LP User Manual download pdf (Page 9)

Basic Installation

Installation – Line Power PBX

For line power installation, use the same instructions above but without using the sup-

plied power adaptor. Then proceed as follows to activate the phone:

1. Lift the handset from the cradle – time and date is displayed on the screen

2. Press I.

3. Press W once. Screen displays

PBX-LINE.

4. Press K. Display shows

ON OFF.

5. Use T or U to change the selection.

6. Press K.

Note: Once line power PBX is activated On, it will activate the Battery Icon.

Important: Operation of the 9116LP in line power mode should be restricted to use

behind a PBX line card with no other extensions running off the same line.

Should more than one phone be in use on the same line card, it is recommended that

the 9116LP be set up using D/C power.

The DC adapter must be connected to the 9116LP if an extension phone is connected to

the same telephone line. This will ensure full functionality for the 9116LP (e.g.

extension in use)

To avoid potential electrical shock hazard to personnel or damage

to the telephone, use only

the manufacturer-supplied equipment

and installation procedures. Speciﬁcally, use only 4 conductor

modular teledapt plug/cords with this product, and an AC trans-

former that is CSA/UL or CSA-NRTL/C approved Class 2 level

C, rated as follows:

For North American Markets AC voltage 110-120V, Input:

120VAC, 60Hz, 10W and Output: 9V DC, 300mA.

Substitution of non-approved equipment will void the Aastra

Telecom Inc., warranty. For more information about installation

and safety concerns, call 1-800-574-1611.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 27 28

No comments

Aastra-telecom 9116LP User Manual Page 9